220V 3.5KW ER20 Square Spindle Motor Flanged Metalworking

Description

新建网页 2
Spindle Motor 3.5KW
NOTE:
Spindle  motor must be equipped with frequency converter.Set up frequency  converter correctly according to machine requirement. The item is not  included frequency converter.
Use Caution :
(1) must match the drive spindle chosen  correctly according to the electric spindle nameplate good debugging  power, voltage and frequency.
(2) Set the frequency converter should be set command channel, and then  set the display channel, and finally set the parameters. When setting  parameters, be sure that the reference frequency, the frequency of the  three highest rated frequency and consistency.
(3) The spindle is generally clockwise in the wrong direction, the drive  can change settings or swap any two rotating wire the inverter output  UVW terminal on.
(4) In general, water-cooled spindle surface temperature and ambient  temperature greater than 20 degrees, the heat can be considered a  spindle; when air-cooled spindle surface temperature greater than  ambient temperature of 30 degrees, can be identified as the main heat  seriously, immediately shut down cooling, a check
Items  Description:
Power: 3500 W
Current：15.9A
Voltage: 220 V
Cooling mode: fan cooling
Lubrication mode: grease lubrication
Chuck nut: ER20(clamping 3-20mm)
Service frequency: 300HZ
Motor speed: 1800rpm
Cone hole beat: 2UM
Bearing model: 2*7008DB P4
2 * 7004 dt P4
Speed mode: through the inverter to adjust the output voltage and  frequency can be achieved 0-18000 stepless
Wiring mode: connect line 123 to frequency converter U, V, W, and line  45 for thermal protection, You can do without 6 bit ground, please  correctly connect or not connect.
Item included:
1set of Spindle Motor 3.5KW
(053289)
Item#
Description
QTY
Unit
053289
Spindle Motor 3.5KW
1
set
新建网页 2
新建网页 2
Shipping & Handling  Details
Default Shipping Cost or Free  Shipping Information:
▲
Default  shipping cost or free shipping service is only for the lower 48 United  States by UPS Ground or USPS. Other areas or needs other shipping ways,  please contact us.
▲
Buyers  from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii,  PO Boxes, APO/FPO addresses or other countries/areas,
there  WILL be extra shipping costs, please contact us for more detailed  information.
▲
Please  make sure your address is valid for both UPS and USPS services. Any  costs incurred because of incorrect or undeliverable address should be  undertaken by buyer.
Handling  Time:
Shipping  is usually made in 1-3 business days after payments cleared. Orders are  processed from Monday-Friday; Not on the weekends & public  holidays.
Sales tax /  Customs duties:
Any  sales taxes or Customs duties are not included. If came out, they must  be undertaken by the buyer. Sales Tax of 8% will be applied for orders  shipped within the state of  California.
Damage In  Shipping:
Email or  call us First! We will work with you to get the case resolved in the  fastest method.
Return /  Refund
If you are not 100% happy with your  purchase, please contact Us. Please don't directly opened a request or  case without informing us, or else, we will do some discounts on the  warranty and other sales-services later on. Hope for your  understanding.
Returns &  Exchanges
▲
All  returns must be made within 14 days of delivery date. Items must be in  new, unused condition, with all original materials included with the  shipment. A partial refund may be applied for opened or damaged items,  depending on the condition.
▲
Items  returned under the buyer’s remorse: The return shipping fee must be  covered by the buyer; The original shipping cost will also be deducted  from the refund. 15% restocking fee of the items purchase price will be  charged.
▲
Returns  that are the result of our seller's error: Buyer will receive a full  refund of the item as well as shipping charges
▲
All  returns require a RA (Return Authorization) number that will be given by  our seller. Please contact with us at first for more  details.
Defective & Damaged Products
▲
If  product was received damaged or not as described, please send us some  pictures or videos, so we could well understand your problem, then solve  them for you ASAP. Besides, it's much helpful for us to claim with UPS,  remind our related department to pay much more attention to packaging  later on. Hope for your understanding.
▲
Replacement  or refund of defective or damaged products can only be returned in  exchange for the exact same product, or else, the purchase price will be  refunded back to your original payment method.
▲
If  an item is received damaged, customer service must be contacted within 7  days of receiving your item. All returns require a RA (Return  Authorization) number as  above.
Payment
eCheck Issues:
Payments  via eCheck do not clear immediately. Usually you will wait 5-7 days  after checkout for it to clear. Then we will arrange shipments for  you.
Warranty &  Feedback
▲
6  months' warranty for the machines, not for the consumables. We stand  behind our products all the item, so even if your warranty period has  expired, you can still seek for service or technical support from us  with low cost.
▲
Any  warranty shipping cost to us is responsible by buyer.
▲
Any  shipping cost to buyer is responsible by the seller.
▲
We  committee to the customer satisfaction and want to bring you the best  purchase experience. If there is any problems, please contact us ASAP.  If not, please leave us a positive feedback as it's very important for  us. Thanks very  much.