3KW BT30 ATC Spindle Automatic Tool Changer ER25 380V/220V + 3.7KW VFD Inverter

Description

3KW BT30 ATC Water cooled Spindle Automatic Tool Changer ER25 380V/220V + 3.7KW VFD Inverter
Automatic Tool Changer spindle vfd kit
Package included:
1 x
3KW Water cooling
Automatic Tool Change Spindle Motor
380V or 220V 6.7A 24000rpm 400Hz
1 x
BT30 ER25
tool holder
1 x 3.7KW 380V or 220V VFD Inverter
English user manual will send by email
pls leave a message in order to tell us the voltage you need,we will
also
confirm the voltage again with you before ship your order.
Product overview
1.This spindle is built-in type spindle motor, built-in three asynchronous motors,by the inverter control.As the spindle has a compact structure,high power, big torque, small vibration, low noise characteristics,so it can achieve high speed,high powe cutting,high precision and high stability operation.
2.The bearing of spindle use grease lubricated angular to contact bearings,can be achieved lifelong lubricating within the life cycle.
3.The spindle use forced coolling mode to coolling motor,front and rear bearings.Coolant flow through the reasonable arrangement cycle watercourse of the spindle body,thus can take the heat generated of the spindle rotation speed, to achieve thermal equilibrium,let spindle temperature within a certain constant value. External cooling device effect:maintaining a constant temperature of the coolant.
4.The spindle built-in PTC 140 temperature sensor(Technical parameters are visible in other sections of this specification),you can read it anytime if you need to protect the motor temperature.
5. The tool clamping methods:this spindle built-in automatic tool change device,shank form is BT30.
Spindle model
RTM100-30-24Z/3.0
Voltage
380V or 220V
Rated speed
15000rpm
Maximum speed
24000rpm
Rated frequency
250Hz
Maximum frequency
400Hz
Electric current
6.8A
Motor level
Level 2
Rated power
3.0KW (S1)
Peak power
4.2KW (S6)
Rated torque
1.9Nm
Peak torque
2.6Nm
Technical parameters
Spindle blowing dust/seal gas pressure (MPa)
0.2-0.25
Spindle gas seal gas flow
(L/min)
65±10 (When on Working)
Cooling water pressure
(MPa)
>=0.25
Cooling water flow
(L/min)
>=2.5
Cooling water temperature(deg
)
24-28
Spindle static state pulse (µm)
<=3
Spindle vibration
(mm/s)
<=0.8
Spindle diameter
(mm)
dia100(0/-0.022)
Motor windings
Pressure test
(V/M)
1500V/1 minute withstanding Voltage test
Tool Interface
BT30
Inverter Specifications
3.7KW (380V)
Fitment
For castings, aluminum, glass, etc., and other processing
2).BT30-ER25 tool holder with 45° pull stud
3). 3.7KW VFD Inverter 380V Sunfar brand,if 220V VFD is Fuling brand
Input Voltage: 380v(+/-15%)
Input Frequency: 50/60Hz
Input Phase: 3 phase
Output Voltage: 380vAC
Output Frequency: 0-1000Hz
Output Phase: 3 phase
Warranty: 2 year from the date you purchased
VS500-4T0037G
​
Description
key word: VS500 series inverter.Relying on its superior costefficiency, VS500 series general inverter is widely
applied in the industry of machine tool, electricity, textile, transportation, transmission,
paper, cable, metallurgy, etc.
The series product has been developed to be model in high stability, reliability after on-site inspection of
more than 700,000 inverters.
Features
1.Compact yet reasonable structure reduces the volume of inverter 20%-30% times than the traditional general inverter; independent cooling duct and closed main loop design
2.Droop control function: automatically balance power of drive system of inverters on the same transmission chain.
Adopts DC fan characterized by the large volume, high wind pressure, excellent cooling
effect and stable performance
3.Particular self-adaptive control technology, allowing for automatic current and voltage limitation and under-voltage suppression during operation.
4.Standard configuration of RS485 communication interface, optional MODBUS protocol and SUNFAR self-defined protocol; with linkage synchronous control function, allowing for easily communicating inverters with PLC,
industrial personal computers and other industrial personal equipments.
Shipping
Please open the package and check if there are some damages before sign,if there are some damages,please do not sign and contact us immediately.
Payment
Only accept paypal payment method.
Payment must be made within 3 days.
Problem&Feedback
Please give us the opportunityto resolve any problem when you have,we concern your problem and we will try our best to resolve it.
Pls contact us before you want to leave any negative feedback.
Refund
Any reason required for all refund. Item must be in it's original condition and no physical damage,buyer responsible for all shipping cost.
When you have the parcel,and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos.