7.5KW 380V Air Cooled Spindle Motor ATC automatic tool change iso30 w/ 7.5KW VFD

Description

7.5KW 380V Air Cooled Spindle Motor ATC automatic tool change iso30 w/ 7.5KW VFD
For CNC Router
Engraving Milling Machine
Package include:
1 x
7.5KW ATC
Air cooled spindle motor
( ISO30,24000rpm,4 bearings,600Hz,
380V
)
1 x 7.5KW Fuling VFD Inverter
380V
(VFD's parameters already been set well for this ATC Spindle)
1 x Aviation plug
1 x ISO30-ER32 Tool Holder
Only have 380V Version!!!
100% Brand New and High Quality!!!
7.5KW ATC Spindle
380V
Product Description
7.5kw air-cooled automatic tool change spindle is a high-end woodworking company designed to develop
high-power electric spindle bearings imported fom Germany, high-precision bearings, high precision, long life.
The electric spindle fan cooling with Road gas seal structure, automatic tool changer with ISO30 shank, feast
automatic tool change and improve the efficiency of the automated processing.
Procuct Name
7.5KW air-cooled ATC spindle
Power
7.5KW
Voltage
380V
Certification
ISO9001, CE, SGS, ROHS
Speed
12000~24000rpm/min
Frequency
600Hz
Current
15A
Collet
ISO30-ER32
Pole number
4
Cooling Type
Air cooling
Barometric pressure
6 bar
Fixed way
Two side,screw fixed
Number of phases
3
Bearing
2*7008  2*7006
Warranty
2 year
Packing list
1pcs spindle with ISO30 Tool
T
he usages of the product and warnings
M
atters need attention when
you
install this spindle
1.
When installed, please carefully, pay attention to personal safety and to avoid injuries occurred during the installed process;
2.
Do not use any tools tapping spindle;
3.
Do not use sandpaper and grinding wheel to wipe or grind in
axis core and taper hole;
4.
Use special removal tool to remov the lock nut and the tool;
5.
Untrained personnel can not disassemble and operate electric spindle;
Attention to maintenance and maintenance
1.
Electric spindle storage temperature is 20
℃
± 10
℃
, humidity
≦
85%, to allow time to store up to three months;
2.
Electric spindle most suitable ambient temperature is 20
℃
± 10
℃
, bearing life can achieve the desired optimum value;
3.
The power cord must take waterproof measure, electric spindle housing must be grounded;
4.
Electro-spindle must not exceed nameplate parameters;
.
5.
Not allowed to use any mechanical way to forced braking
in
the shaft;
6.
after
using
the
spindle every day,
you
should wipe spindle taper,then smear with rust oil;
7.
Workplace must be clean, there should be strict dust control measures to prevent foreign matter enter the spindle.
Product common malfunctions&method of exclusion
Fault phenomenon
Reason
Method of exclusion
Electric spindle is not running after boot
1
、
No inverter power output or set incorrectly
Check that VFD supply three-phase output voltage and setting method
2
、
Spindle plug is not inserted
Check the electrical spindle plug and connection.
3
、
Bad plug connector
4
、
Bad
stator
line package
Replace line package
Shutdown after a few seconds of the boot
1
、
Start time is too short
Increase the acceleration time
2
、
Electric spindle high temperature cause line package insulation damaged
Replace line package
3
、
Electric spindle lose phase to run,then cause overcurrent protection blackout
Check the electric spindle connection
Electric spindle smoking or the housing hot after a few second of the boot
1
、
Inverter output voltage, frequency are not match the use of electric spindle voltage and frequency
Check the VFD and the spindle voltage, frequency
2
、
The VFD is not set correctly
Reset the VFD
Locking nut loose when it is started
Wrong direction of rotation
Change the direction of rotation
Spindle have big noise and vibration
1
、
Bearing wear seriously
Replace the bearing
2
、
Precision of parts damaged,it’s effect dynamic balance
Calibration of dynamic balance
3
、
Big beat of Spindle
Replace the spindle
Locking nut loose when it is stoped
Stop time is too short
Increase the deceleration time
7.5KW VFD Fuling Brand Inverter
Frequency Inverter Variable Frequency Driver
1) Input Voltage: 380V
2) Output Voltage: 380V
3) Input Frequency: 50-60 Hz
4) Output Frequency: 0-1000 Hz
5) Input Phase: 3 phase
6) Output Phase: 3 phase
7) Warranty: 2 year
8) Output currency:18
A
Feature:
It could adapt to the dust working environment.
This VFD can be used for constant torque loads ( such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc). It can be used as a motor speed control and a phase converter. The input for this VFD is 1 or 3 phase as you like. You can control different speed when you use this VFD. Most of our customers bought this VFD from us to use for: Lathes, Mills, Car Hoists, Pumps & Conveyors, etc. This item uses Sine wave PWN(SPWM ) for the control system and performance excellently.
Payment:
> 1. Payment is needed to receive within 5 days after deal.
> 2. We only accept PayPal.
> 3. PayPal is the only online payment method we accept. Please make sure you have a valid/confirmed PayPal account prior bidding. And please make sure that your PayPal registed address is the same with your eBay registed address.
Feedback:
We maintain hightest buyer ratings
> Positive Feedback will be much appreciated from you.
> Any dissatisfaction,please contact us immediately!
> Please do not leave neutral or negative feedback before we help you out.
Returns:
> Defect: We will fully refund or send you a new replacement,please contact and return within 30 days.
> Dissatisfaction: Please contact within 3 days, we will fully refund, after got your returned goods.
> Missing parts/Q'ty: Please contact us immediately,for a new package arranged,or a partial refund issued.
Contact us:
> If have any question, Please contact us by ebay message before leaving neutral, negative feedback or open any dispute, we will reply within 24hours, ensure that help you solve the problem, make you satisfied.